News | Rakon

Rakon launches miniature ASIC-based TCXO for LEO satellite applications 

Written by Rakon | 18 November 2026



New 5.0 × 3.2 mm radiation-tolerant TCXO combines Rakon’s Niku-RT™ ASIC and XMEMS® technologies to deliver stable, low-noise frequency control for commercial space systems

Rakon, a Bourns company and a global leader in frequency control and timing solutions, has launched the RK300ICNS, a miniature Temperature Compensated Crystal Oscillator (TCXO) designed for Low Earth Orbit satellite applications. 

Advanced frequency control in a compact package

At just 5.0 × 3.2 × 1.2 mm, the RK300ICNS combines Rakon’s proprietary radiation-tolerant Niku-RT™ ASIC with its patented XMEMS® resonator technology to deliver a stable, low phase noise frequency reference in a compact surface-mount package.

The Niku-RT ASIC integrates the oscillator’s control and temperature-compensation functions into a single integrated circuit. It continuously corrects for changes in the resonator’s frequency across the operating temperature range, enabling tight frequency stability from -40°C to +85°C.

Replacing multiple discrete components with an ASIC also reduces product size and component count. This supports consistent performance, manufacturing repeatability and scalable production for commercial satellite programmes.

Rakon’s patented XMEMS resonator technology provides the stable frequency reference at the heart of the oscillator. Its design reduces sensitivity to acceleration and vibration, helping the RK300ICNS maintain its frequency during launch, satellite manoeuvres and reaction-wheel operation.

Together, the Niku-RT ASIC and XMEMS resonator combine precise electronic compensation with strong mechanical stability. This makes the RK300ICNS particularly well-suited to LEO satellites and constellations, where size, weight, power, reliability, and production scalability are critical.

Key specifications

  • Package: 5.0 × 3.2 × 1.2 mm surface mount, hermetically sealed

  • Frequency range: 10 to 156.25 MHz

  • Frequency stability: ±300 ppb maximum over -40°C to +85°C

  • Low g-sensitivity: ±0.2 ppb/g

  • Close-in phase noise: -118 dBc/Hz at 100 Hz offset at 80 MHz

  • Floor phase noise: < -165 dBc/Hz at 1 MHz offset at 80 MHz

  • RMS phase jitter: <50 fs @ 122.88 MHz (12 kHz to 20 MHz)
  • Radiation tolerance: 50 krad Total Ionising Dose (TID) guaranteed

  • Latch-up immunity: latch-up free to a Linear Energy Transfer of 43 MeV·cm²/mg

  • Supply voltage: 3.3 V

  • Output: square wave 

Stable, low-noise performance in dynamic conditions

The RK300ICNS combines tight frequency stability with low sensitivity to acceleration, low phase noise and very low jitter. 

Its low g-sensitivity limits vibration-induced frequency changes. Low phase noise and jitter help preserve the quality of the frequency reference used in RF synthesis and high-speed data conversion.

For satellite manufacturers, this combination supports cleaner communications signals, more accurate data conversion and reliable payload timing during launch and in orbit.

Higher reference frequencies for simpler payload design

Operating at frequencies up to 156.25 MHz, the RK300ICNS can provide a reference closer to the frequency required by modern payload electronics. This can reduce the amount of frequency multiplication required by synthesizers and phase-locked loops, helping simplify frequency-generation architectures and limit the phase-noise degradation associated with high multiplication ratios.

The result is a clean, stable reference for applications including frequency converters, synthesizers, GNSS receivers, communications payloads and onboard processing systems.

Designed for LEO environments

The RK300ICNS provides 50 krad TID tolerance guaranteed and is latch-up free to 43 MeV·cm²/mg. Its 3.3 V supply and square-wave output support integration with modern digital payload electronics.

The product builds on Rakon’s ASIC and XMEMS platforms already deployed in demanding terrestrial applications, including AI data-centre infrastructure, 5G telecommunications and precision positioning. Bringing these technologies to commercial space gives satellite manufacturers a compact frequency-control solution supported by established design and production experience.

“Commercial LEO satellite manufacturers need frequency-control products that combine resilience to the space environment with the size, performance and production scalability expected from modern electronic components,” said Rami Khouri, Global Head of Product Management, Aerospace & Defence at Rakon.

“By bringing together our Niku-RT ASIC and XMEMS resonator technologies, the RK300ICNS maintains a stable, low-noise frequency reference even when exposed to changing temperatures, vibration and acceleration. This supports cleaner RF generation, accurate high-speed data conversion and reliable payload performance in a compact, scalable design.”

Applications and availability

The RK300ICNS is designed for:

  • Frequency converters

  • Synthesizers

  • GNSS receivers

  • Communications payloads

  • Onboard processing systems

  • Other satellite electronics requiring a clean, stable frequency reference

Rakon is introducing the RK300ICNS at Space Tech Expo Europe 2026 in Bremen, Germany. Visitors can meet the Rakon team in Hall 4, Stand E06 to learn more about the new TCXO and Rakon’s wider portfolio of frequency-control products for commercial and high-reliability space applications. For more information about the RK300IC-NS, contact our sales team.

To understand why radiation-resilient oscillators matter in space, even in LEO environments, check out this blog article.